Admin\ Wireless Setup - Oki B710 User Manual

Admin\ Wireless Setup

Note
Settings made in the printer driver when printing a job will
override these settings.
Default settings are in bold face type.
Submenus
WPS PIN Connect
WPS PBC Connect
Select Network
Remove Network
IP Address Set
IP Address
Subnet Mask
Gateway Address
Factory Default
Available Settings
Enter PIN on Access Point
Push WPS Button on Access Point
Choose from list of discovered nets
Choose from list of remembered nets
Manual, * Automatic
IP Address Displayed
Display of Subnet Mask
Display of Gateway Address
Set Wireless Factory Defaults
B710, B720, B730 User's Guide > 55