Table of Contents
Advertisement
F
AXING
NOTE
If your Administrator has enabled access control on your machine, it will
automatically start up in access control mode. You will not be able to use it
until you have provided valid login information. Refer to
and access control" on page 38
When faxing, you can load only A4, letter, or legal size documents in the ADF,
and A4 or letter size documents on the document glass. You cannot load mixed
size documents.
S
ENDING A FAX FROM THE
This section details how to send a fax directly from your MFP.
B
ASIC OPERATION
1
1.
Place your document(s) with text face UP in the ADF or face DOWN on the glass.
2.
Press the Fax button (1) on the control panel to prompt the Fax Mode screen.
3.
Ensure Fax is highlighted, then press OK.
4.
Set your destination and send properties as required. Refer to
on page 88
for details.
5.
Press the Mono button (3) to start sending your document(s).
NOTE
If you wish to cancel faxing, press Stop (4) to abort the operation.
You can cancel a job that is being transmitted as long as the message
indicating the job has been completed has not displayed. Refer to
view/cancel" on page 97
When you select a broadcast job, the job itself is cancelled. If you want to
cancel an individual destination within a broadcast job, refer to
specified destinations" on page
Fax transmissions are sent in black and white only.
for details.
MFP
for details on how to cancel a reserved job.
90.
Faxing > 87
"User authentication
2
3
4
"Advanced operation"
"Fax job
"Deleting
Advertisement
Table of Contents
