Assembling The Stand; (Ce3000-120: Standard / Ce3000-60: Optional); Stand Construction; Stand Assembly Instructions - GRAPHTEC CE3000-40 User Manual

1.3

Assembling the Stand

I Stand Construction
The stand is made up of the following parts.
Stand feet (L/R)
CE3000-60
CE3000-120
Hexagonal socket bolt
(M5) x 12
I Stand Assembly Instructions
1
Step
Fasten the stand feet (L/R) to the stand side bars (L/R) with the hexagonal socket bolts (M5), using the
Allen wrench.
CE3000-60

(CE3000-120: Standard / CE3000-60: Optional)

Stand side bars (L/R)
CE3000-60
CE3000-120
Coin screw x 4
CE3000-60 only
Front
Stand side bar
* There are three
bolt holes, but
the center one
is not used.
Center bar
CE3000-60
CE3000-120
Hexagonal socket bolt
(M6) x 8
CE3000-120 only
CE3000-120
Hexagonal
socket bolt (M5)
Stand foot
Stopper
1 – 7
Allen wrench (M5) Allen wrench (M6)
CE3000-120 only
Hexagonal
socket bolt (M5)
Front
Stand foot
Stand side bar