Self-Test-Pattern Printing; Dump Mode - GRAPHTEC CE3000-40 User Manual

I Self-Test-Pattern Printing
This function prints out a self-test pattern to check the accuracy of the cutting plotter.
1
Step
Mount a plotting pen in the pen carriage, and set the conditions to suit the pen used (e.g., force, pen speed
settings).
2
Step
Load an A3-size or larger medium.
3
Step
Press the (PAUSE) key to switch to PAUSE mode.
4
Step
Press the (NEXT) or
T E S T M O D E
5
Step
Press the (ENTER) key to display the test-mode submenu, and press the
key until the following menu is displayed.
S E L F T E S T
6
Step
Press the (ENTER) key to start printing the self-test pattern.
7
Step
When the self-test pattern has been printed, turn on the power again.
The pen carriage begins moving as soon as this function is set. Keep your hands and
CAUTION
other objects away from the cutting plotter's moving parts.
I Dump Mode
This function checks whether data is sent correctly from the computer. If the output data does not match
the program after the dump list has been output, check the transfer conditions and connections.
1
Step
Mount a plotting pen in the pen carriage, and set the conditions to suit the pen used (e.g., force, pen speed
settings).
2
Step
Load an A4-size or larger medium.
(PREV.) key until the following menu is displayed.
4 – 40
(NEXT) or (PREV.)