Connecting The Power Supply; Charging A Battery Pack - Symbol PDT 1100 Product Reference Manual

PDT 1100 Terminal Product Reference Guide
Name
Power Light
CHG/TRK Light
DIS CHG Light

Connecting the Power Supply

The CRG 1100 is powered by an AC input 100-240VAC/DC output 12V 1.5A power supply
(p/n 50-14000-103), and requires a DC inter-connect cable (p/n 50-16002-013).
1. Connect the DC inter-connect cable to the CRG 1100 and the other end to the
power supply.
Figure 5-8. Connection of the AC Power Supply
2. Connect the power supply to the wall outlet.

Charging a Battery Pack

The four battery slots on the CRG 1100 can charge independently. Slot 4 includes a
discharge function.
To charge a battery pack:
1. Turn the power switch to ON. The power light illuminates.
5-10
Table 5-2. CRG 1100 Components (Continued)
Illuminates when power is supplied. Blinks when power supply is
faulty.
Illuminates throughout normal charging, blinks in case of
abnormalities in battery charging (about every .5 seconds). Blinks
about every 2 seconds during trickle charging.
Lights up during discharge (slot 4 only).
Description