Symbol PDT 1100 Product Reference Manual page 24

PDT 1100 Terminal Product Reference Guide
2. The confirmation screen displays. Check the selected memory area on the second
line.
• Press 1 then ENT to shift to the message version selection screen before
executing initialization.
• Press 2 then ENT to cancel initialization and turn off the power.
3. The screen indicates that the PDT 1100 is initializing. When initialization is
complete, the PDT 1100 displays a completion message then turns itself off.
Note: Powering off the PDT 1100 before the initialization completion
To repower the terminal and display the System Menu, hold down the SF key and 1 key,
and press the PW key. Refer to
1-8
screen appears interrupts initialization, requiring you to repeat
initialization.
If the message "System error! Contact your administrator. Note the
error drive. (DRIVE X)" appears after initialization, initialize the PDT
1100 again. If you initialize the PDT 1100 after downloading user
programs and data, all programs and data stored in the target
memory area are lost. Download them again if necessary.
Initialization restores the LCD contrast level, communications
conditions and other settings to the default values, so modify them if
necessary.
Chapter 4, System Mode
INITIALIZE
(ALL)
OK?
1:Yes 2:No
to continue.