Table of Contents
Advertisement
PDT 1100 Terminal Product Reference Guide
e. Press 3 to select the communications protocol option. The following screen
displays:
f. Select one of the following using the numeric keys or F5 and F6 keys.
Note: If the IR protocol is selected, the serial number and horizontal parity
settings are ignored.
•
Select 1:SERIAL NO. on the SET PROTOCOL menu to select whether to
add serial numbers to data blocks.
•
Select 2:H.PARITY on the SET PROTOCOL menu to select whether to add
a horizontal parity.
•
Select 3:LINKUP TIME on the SET PROTOCOL menu to select the timeout
length (in seconds) to be applied when a link is to be established.
•
Select 4:FIELD SPACE on the SET PROTOCOL menu to select whether
space codes in the tail of a data field should be ignored or handled as data.
g. Press ENT to enter your selection, or C to return to the Set Optical screen.
4-18
SET PROTOCOL
<OPTICAL>
1:SERIAL NO.
2:H.PARITY
3:LINKUP TIME
4:FIELD SPACE
- Quick Links:
- Initializing the Pdt 1100
Hide quick links:
Advertisement
Table of Contents
