Symbol PDT 1100 Product Reference Manual page 72

PDT 1100 Terminal Product Reference Guide
3. If an error occurs, the slave PDT 1100 beeps three times and displays the following
screen.
1: 2400 bps
2: 9600 bps
3: 115200 bps
Press the C key to return to the TEST COM menu. The master PDT 1100
automatically returns to the TEST COM menu 10 seconds after an error occurs.
4. When the test is complete, the tested slave PDT 1100 beeps once and indicates
the test is OK.
5. Press the C key to return to the TEST COM menu. The master PDT 1100
automatically returns to the TEST COM menu.
To test the direct-connect interface port:
1. Select 2:CONNECTOR on the TEST COM menu to initiate the test.
2. If an error occurs, the PDT 1100 beeps three times and displays the following
screen.
Press the C key to return to the TEST COM menu.
4-28
TEST COM
<OPTICAL>
** Test NG**
TEST COM
<CONNECTOR>
** Test NG**
1: 300 bps
2: 38400 bps
1:
2:
(xx)
1:
2:
(
XX)
The received data is different
from the sent data.
A timeout has occurred
during standby for data
The received data is different
from the sent data.
A timeout has occurred
during standby for data