Setting The Resume Function - Symbol PDT 1100 Product Reference Manual

PDT 1100 Terminal Product Reference Guide
To set bar code scanning parameters:
1. Select 4: BAR CODE on the Set System menu to display the following screen:
2. Select one of the following:
• Press 1 to activate or deactivate the black-and-white inverted label reading
function.
• Press 2 to set the decode level
• Press 3 to set the minimum number of digits for ITF
• Press 4 to set the minimum number of digits for STF
• Press 5 to set the minimum number of digits for Codabar.
3. Select a desired setting using the F7 and F8 keys.
• To increase the decode level, press the F8 key; to decrease it, press the F7 key
• To increase the number of digits to be read for ITF, STF and CODABAR, press
the F8 key; to decrease it, press the F7 key.
4. Press the ENT key. To return to the Set System menu, press the C key.

Setting the Resume Function

The resume function resumes the display shown before power off, when the terminal is
powered up. To set the resume function:
1. Select 5: RESUME on the Set System menu. The following screen displays:
4-14
SET BAR CODE
1:INVERT ON OFF
2:DECODE LEVEL 4
MINUMUM DIGITS
3:ITF 4 4:STF 2
5: CODABAR 4
SET RESUME
1: ON 2: OFF