Charging The Internal Battery; Moving To A Different Power Source - Symbol VRC 6940 Quick Reference Manual

Hide thumbs Also See for VRC 6940:

Table of Contents

V R C

Scanner

Connector

3. Press the ON/OFF key to power the terminal on.

4. For information on using the scanner, consult the documen-

tation that came with the scanner.

Charging the Internal Battery

The VRC 6940 has an internal battery that provides power and

saves your session if there is a temporary fluctuation,

disconnection, or interruption in the unit's main power supply. The

internal battery recharges itself from the terminal's main power

supply. You cannot use it to operate the unit. For more information,

see

Installation and the Internal Battery on page

To move a VRC 6940 terminal from one location to another:

1. Save all data you are working with, and close all applications.

2. Press the ON/OFF key to suspend the terminal.

3. Make sure a power source is ready in the new location.

4. Unplug the external power cable from the Power Connector

on the back of the terminal.

5. Remove the terminal from its current mounting.

6. Move the terminal to the new location and mount it.

7. Plug the external power cable into the Power Connector.

For more information on installation and power, see

Note:

If you unplug the power cable, and the internal battery

is not charged, the terminal may shut off.

6 9 4 0

T e r m i n a l

17.

Back of terminal

page

Table of Contents