Errors In System Mode - Symbol PDT 1100 Product Reference Manual

Errors in System Mode

If an error occurs during operation in System Mode, one of the following error messages
appears on the LCD.
Error Message
EXECUTE
PROGRAM NO
FILE EXISTS
SET EXEC
PROGRAM NO
FILE EXISTS
UPLOAD FILE (A:)
NO FILE EXISTS
DELETE FILE (A:)
NO FILE EXISTS
DOWNLOAD FILE
(A:)
Out of memory!
Retry? 1:Yes2:No
Table D-2. System Mode Errors
Problem
You attempted to execute
a user program in the
EXECUTE PROGRAM
menu, when no user
program files are stored in
memory.
In the SET SYSTEM
menu, you attempted to
select a user program file
as an execution program
to be run when the power
is applied when no user
program files are stored in
memory.
You attempted to select
RAM or flash ROM for
uploading in the UPLOAD
menu when no data files
are stored in the selected
memory.
You deleted all files stored
in the designated memory
in the DELETE menu.
The designated memory
is insufficient for storing
files to be downloaded.
Possible Solution
Load the appropriate program.
Load the appropriate program.
Press the C key to return to the SYSTEM
MENU screen.
Press the C (clear) key to return to the
SYSTEM MENU screen.
Press the 2 key to return to the SYSTEM
MENU, then delete unnecessary files in the
memory or decrease the size of the file to be
downloaded.
Error Messages
D-3