Recharging The Battery In The Pdt 1100 - Symbol PDT 1100 Product Reference Manual

Recharging the Battery in the PDT 1100

To charge the battery in the PDT 1100:
1. Turn on the CRD 1100.
2. Place the PDT 1100 (with the battery loaded) in the cradle. After approximately 10
hours, the CHG1 LED flashes at 2 second intervals. This indicates that charging is
complete.
LED Indications for Recharging in the PDT 1100
The cradle is on standby mode.
Charging begins.
The battery is fully charged and
trickle charging begins.
Figure 5-4. Charging the PDT 1100 Battery
Battery Charging and Terminal Maintenance
35864008.eps
ON
POWER
CHG1
ON
POWER
CHG1
ON
ON
POWER
CHG1
Flashing at 2-second intervals.
DATA
CHG2
DATA
CHG2
DATA
CHG2
5-5