Crd 1100; Crg 1100 - Symbol PDT 1100 Product Reference Manual

PDT 1100 Terminal Product Reference Guide

CRD 1100

Problem
No communication
between terminal
and cradle.
Power light does
not illuminate.
NiMH battery pack
did not charge.

CRG 1100

Problem
The Power light
does not illuminate.
5-16
Table 5-4. Troubleshooting the CRD 1100
Possible Cause
Terminal not seated
properly in cradle.
Power switch is off.
AC adapter not
connected properly.
Power switch is off.
Battery pack failed.
Insufficient charging
time.
Battery charging
terminals on the battery
pack and the charger are
dirty.
Table 5-5. Troubleshooting the CRG 1100
Possible Cause
AC adapter is not
connected to an AC
outlet.
Charger power switch is
not ON.
Solution
Seat terminal properly in cradle.
Turn power switch on.
Properly connect AC adapter.
Turn power switch on.
Replace the battery pack.
Allow the full 10 hours for battery pack to charge.
Check and clean battery pack and charger
terminals.
Solution
Connect the AC adapter to an AC outlet.
Set the power switch to ON.