Downloading - Symbol PDT 1100 Product Reference Manual

Downloading

If you are downloading from another PDT 1100, first perform the following:
1. At each PDT 1100, set the interface port. The default is an optical interface (OPT).
Starting on the SYSTEM MENU, select "4:SET SYSTEM," "6:COM," then "3:COM
PORT."
2. On the SET COM PORT screen, select the optical interface (OPT) or direct-
connect interface (IFC) of "2:SYSTEM MODE."
3. When using the direct-connect interface, pull out the connector cover on each PDT
1100. Connect the ports on the PDT 1100s using the direct-connect interface cable
(with 3-pole mini stereo plugs).
4. On the uploading PDT 1100, run System Mode and select "3:UPLOAD," then
"5:HT<->HT COPY."
To download files to the terminal:
Note: If you download a file with the same name as one already used in
the user area of the target memory, the new file replaces the old one.
1. On the downloading PDT 1100, select "2: DOWNLOAD" on the System Menu.
The Download menu displays.
2. Select an item from the download menu.
• Press 1 then ENT to download a user program file (object file compiled by the
BASIC 3.0 Compiler) or data file to RAM.
SYSTEM MENU
1:EXEC PROGRAM
2:DOWNLOAD
3:UPLOAD
4:SET SYSTEM
5:TEST 6:VER
DOWNLOAD
1:DRIVE A
2:DRIVE B
3:HT<->HT COPY
System Mode
4-5