Component Led Descriptions; Powering The Crd 1100 Cradle - Symbol PDT 1100 Product Reference Manual

Component LED Descriptions

Table 5-1 describes the components of the cradle and functions of the LED lights.
Name
Terminal charge contacts
IR port
Status LED panel
RS-232C interface port
Power port
Power switch
Power LED (green)
Data communications LED
(green)
CHG2 LED (yellow)
CHG1 LED (yellow)
Battery pack slot

Powering the CRD 1100 Cradle

The CRD 1100 is powered by an AC input 100-240VAC/DC output 12V 1.5A power supply
(p/n 50-14000-03), and a DC inter-connect cable (p/n 50-16002-013).
1. Power off the CRD 1100.
2. Connect the DC inter-connect cable to the CRD 1100, and the other end to the
power supply.
3. Connect the power supply to the wall outlet.
4. Power on the CRD 1100.
Battery Charging and Terminal Maintenance
Table 5-1. CRD Components
Contacts for charging the NiMH battery while in the terminal
(not provided on the non-charging CRD 1100).
Exchanges data optically with the terminal.
Indicates communication and charging status.
Exchanges data with the host computer via serial cable.
Plug AC power supply into this port.
Turns the cradle on and off.
Lights when power is provided to the CRD 1100.
Lights when cradle is communicating with host computer.
Battery pack charge light. Lights when charging a NiMH
battery pack in the battery slot. When charge is complete,
flashes.
Lights when the cradle is charging a NiMH battery loaded in
the terminal. When charge is complete, flashes.
For charging the battery removed from the terminal (not
provided on the non-charging CRD 1100).
Description
5-3