Selecting Tasks; Entering Alphabetic Characters; Setting The Backlight - Symbol PDT 1100 Product Reference Manual

PDT 1100 Terminal Product Reference Guide

Selecting Tasks

If the LCD shows the selection (xxx) prefaced by a number (i.e., 1:xxx, 2:xxx), use the
numeric keys to select the desired item and press the ENT key.
If a YES/NO screen (e.g., 1:Yes, 2:NO) appears, respond by pressing 1 for yes, 2 for no.

Entering Alphabetic Characters

You may enter letters, characters and spaces from the keypad during execution of a user
program. Refer to Appendix C, Alphabet Input Procedure

Setting the Backlight

Hold down the SF (shift) key and press the M1 key to turn the backlight function on or off.
M1
ABC
JKL
STU
+-*
2-2
GHI
DEF
PQR
MNO
YZSp
VWX
/$%
SF
35864011.eps
Figure 2-1. Setting the Backlight
for more information.
Backlight Off (the
backlight is off
when the terminal
is powered on)
Press M1 while
holding down SF
Backlight
If no key is
pressed for at
least 3
Backlight Off (the
backlight function
is kept on)
Press any key to
turn backlight on
again (except
combination of M1
and SF)
Press M1
while
holding