Testing - Symbol PDT 1100 Product Reference Manual

M1 through M4 keys. The last key defined acts as the backlight
function on/off key and one defined earlier is ignored.

Testing

The PDT 1100 terminal conducts tests of all systems upon initialization. To perform a
system test:
1. Select 5:TEST on the system menu.
The following screen displays:
2. Select a test to run:
• Press 1: BAR CODE to select the bar code reading test.
• Press 2:MEMORY to select RAM read/write test.
• Press 3:BEEPER to select the beeper scale test.
• Press 4:AGING to select the aging test.
• Press 5:COMMUNICATIONS to select the communications test.
• Press 6:LCD to select the LCD and reading confirmation LED tests.
• Press 7:KEY to select the key entry, beeper and vibrator tests.
• Press 8:FILE to select the file checksum test.
3. Press ENT to enter your selection, or the C key to return to the System Menu.
SYSTEM MENU
1:EXEC PROGRAM
2:DOWNLOAD
3:UPLOAD
4:SET SYSTEM
5:TEST 6:VER
TEST
1:BAR CODE 6:LCD
2:MEMORY 7:KEY
3:BEEPER 8:FILE
4:AGING
5:COMMUNICATIONS
System Mode
4-23