Appendix D Error Messages; System Errors - Symbol PDT 1100 Product Reference Manual

This appendix contains information on the error messages that the PDT 1100 may display.
The first section deals with System Errors, and the second section deals with errors in the
System Mode. The tables describe the error messages, give possible causes for the
problem, and note some possible solutions. In the event of a problem that cannot be solved,
contact your Symbol Support Center.

System Errors

If an error occurs in the system, one of the following error messages appears on the LCD.
Error Message
No System!
Battery voltage has
lowered
Replace the
batteries! or
Charge the battery!
Reload the battery to
restart! 01
Appendix D
Error Messages
Table D-1. System Error Messages
Problem
A system Program Error
has occurred.
Battery output has dropped
below a specified lower
level limit.
Battery output has reached
a critical low.
During execution, the
System Program has
attempted to write onto a
write-protected area of
RAM.
Possible Solution
Contact your nearest Symbol Support
Center.
Batteries will require replacement or
recharging soon.
Replace or recharge the batteries
immediately.
Unload and reload the alkaline batteries
or the battery pack, then power on.
D-1