Software - Symbol PDT 1100 Product Reference Manual

PDT 1100 Terminal Product Reference Guide
Host Computer
An IBM PC/AT or PS/2 is required for this system.
OS.
Table 3-1. Optional Application Programs and Operating Systems
Applications
Extension Library
BASIC 3.0 Compiler
Ir-Transfer Utility C
Ir-Transfer Utility E
CRD 1100 and RS-232C Interface Cable
The CRD 1100 is an optional communications cradle which is required when your host
computer is not equipped with an IR interface port. The cradle exchanges data and
programs with the PDT 1100 terminal optically, and with the host computer via the RS-232C
interface cable. You may connect the PDT 1100 directly to the host computer via cable or
with a modem. Use a compatible direct-connect interface cable with all target equipment.
Note: The direct-connect interface port of the PDT 1100 is not designed to
withstand frequent connecting/disconnecting. Use the cradle (CRD-
1100) when frequent communication is required.

Software

BASIC 3.0 software required for operating the PDT 1100 System Mode is stored in flash
ROM. Optional software includes the Extension Library, Compiler, Ir-Transfer Utility C and
Ir-Transfer Utility E. Each program is provided on diskette and runs on the host computer.
You must have at least one of the Ir-Transfer Utility software programs to communicate with
the terminal.
3-2
Table 3-1 lists the optional programs and
Operating Systems
Windows version 3.1
Windows 95
WindowsNT 3.51
WindowsNT 4.0
Windows 3.1- based
Windows95/ WindowsNT based
Windows95/ WindowsNT based