•
Press 2 to set the message version, display font size (standard or small), and
system status indication (shift-key icon).
•
Press 3 to set the calendar clock (date and time).
•
Press 4 to set scanning parameters (black-and-white inverted label reading and
the decoding level) and the minimum number of digits to read for bar codes (ITF,
STF and Codabar).
•
Press 5 to set the resume function.
•
Press 6 to set the communications options (interface port and communications
parameters).
•
Press 7 to define the functions of the shift key and the M keys.
Setting an Execution Program
To select an execution program:
1. Select "1: PROGRAM" on the SET SYSTEM menu. The following screen displays:
2. Select an execution program to run when power is applied to the terminal. The files
in RAM display as "A:FILE NAME;" the flash-ROM files are "B:FILE NAME."
If no program files are stored in memory, the following screen appears.
3. Press ENT to enter your selection or C to return to the Set System menu.
SET EXEC PROGRAM
A:EASYPACKPD33
A:SAMPLE1.PD3
A:SAMPLE2.PD3
B:SAMPLE3.PD3
B:SAMPLE4.PD3
SET EXEC
PROGRAM
*******************
NO FILE EXISTS
*******************
System Mode
4-11