Symbol PDT 1100 Product Reference Manual page 95

Table 5-5. Troubleshooting the CRG 1100 (Continued)
Problem
DIS CHG light does
not illuminate.
CHG/TRK light
does not illuminate.
Power light blinks.
The CHG/TRK light
blinks.
Possible Cause
Battery pack is not
inserted properly in slot
4.
Battery charging
terminals on the battery
pack and the charger are
dirty.
Battery pack is not
inserted properly in a
charging slot.
Battery charging
terminals on the battery
pack and the charger are
dirty.
AC power output is too
low.
Proper AC adapter is not
used.
There is an abnormality
in the battery pack.
Battery Charging and Terminal Maintenance
Solution
With the power switch OFF, insert the battery
pack in slot 4 again, then turn the power switch
ON.
Clean the charging terminals on the battery pack
and the charger.
Make sure the battery pack is properly inserted.
Check and clean battery pack and charger
terminals.
Make sure AC power output is sufficient.
Use proper AC adapter.
Insert another battery pack to see if the same
problem occurs. If it does, contact the dealer.
5-17