Symbol PDT 1100 Product Reference Manual page 61

Optical Parameters
To set communications parameters for the optical interface:
1. Select 1:OPTICAL on the SET COM menu. The following screen displays:
2. Select each of the following:
a. Press 1 to select the transmission speed. The following screen displays:
b. Select the transmission speed using the numeric keys or F5 and F6 keys. Press
ENT to enter your selection, or C to return to the Set Com menu.
c. Press 2 to select the IR beam output pulse width. The following screen displays:
d. Select the pulse width using the numeric keys or F5 and F6 keys. Press ENT to
enter your selection, or C to return to the SET OPTICAL screen.
SET OPTICAL
1:TRANSMIT SPEED
2:PULSE WIDTH
3:PROTOCOL
SET SPEED
<OPTICAL>
1: 2400 4: 38400
2: 9600 5: 57600
3:19200 6: 115200
SET PULSE WIDTH
<OPTICAL>
1: 1.63us
2:3/16 Bit Time
System Mode
4-17