Symbol PDT 1100 Product Reference Manual page 32

PDT 1100 Terminal Product Reference Guide
Connecting the Interface Cable
To connect the CRD 1100 cradle to the host computer using the serial interface cable:
1. Power off both the cradle and the host computer.
2. Connect the 25-pin plug of the interface cable to the RS-232C interface port of the
cradle.
3. Connect the other end of the interface cable to the host computer.
2-6
115,200 bps
1 2 3
ON
OFF
OFF
38,400 bps
ON
1 2 3
OFF
OFF
9,600 bps (factory setting)
ON 1 2 3
OFF
OFF
Figure 2-4. Dip Switch Settings
Figure 2-5. Interface Cable Connection
57,600 bps
1 2 3
ON
OFF
OFF
19,200 bps
1 2 3
ON
OFF
OFF
35864023.eps
RS-232C
Interface Port