Symbol PDT 1100 Product Reference Manual page 65

2. Select one of the following:
• Press 1 to select the protocol for downloading or uploading files in System
Mode or for the execution of XFILE statement in BASIC 3.0 Interpreter. Select
this protocol for file transmission with Transfer Utility.
• Press 2 to select the IR protocol for downloading or uploading files in System
Mode or for the execution of XFILE statement in BASIC 3.0 Interpreter. Select
this protocol for file transmission with IR-Transfer Utility C/IR-Transfer Utility E.
3. If you selected 2: IRProtocol, the following screen displays:
4. Enter the ID number of the PDT 1100 using the numeric keys, then press ENT, or
just press ENT to retain the current setting.
Note: An ID number is a five-digit decimal character string ranging from
00001 to 65535. You cannot enter a value less than five digits.
If you make a wrong entry, press the BS key to delete it then enter the correct data. Press
the C key until you return to the Main Menu.
SET ID
00001 >>_
SET ID
00001 >>_65535
System Mode
4-21