Content; People+Content Ip; Install People+Content Ip - Polycom realpresence group series User Manual

Content

To show people and content at the same time, the RealPresence Group systems must be configured for
content. You can show the following to the far-end systems:
● Any information stored on a computer connected directly to a Polycom RealPresence Group systemA
paper document or object placed on a document camera
● A DVD or DVR player connected directly to a Polycom RealPresence Group system
● Content from the Polycom People+Content™ IP application (installed on a computer and connected
to the Polycom RealPresence Group system)
Note: Copyright-protected media
If you attempt to display copyright-protected content on the local interface, such as from a DVD or
DVR, the following message is shown on the RealPresence Group system: "This content is protected
and cannot be displayed or shared." This message appears in a call and out of a call.
You can show one content source and one people video source at a time, and you can switch to a different
type of content or people video source if you need to. Participants at other sites can also show content or
people video sources. Content shown is from one site at a time; another site sharing content overrides any
content being shared.
When you are showing content, a message appears on your main monitor. Whether you also see the
content on your monitor or projector depends on how your system was configured.
Note: Showing content on RealPresence Group 300 systems
To show content on a RealPresence Group 300 system, you must use the People+Content IP
application.

People+Content IP

The People+Content IP application allows you to send content from a computer that is not connected
directly to the RealPresence Group system.
Keep the following points in mind about People+Content IP:
● People+Content IP provides video-only content. No audio is shared.
● People+Content IP supports any computer desktop resolution with color set to 16-bit or higher.
● Your computer resolution can be set to anything, but People+Content IP scales the image to
1024x768 or 1280x720.

Install People+Content IP

You must install the People+Content IP application on a computer before you can use it to show content.
To install People+Content IP on a computer:
1 On a computer with a Microsoft
Mac OS 10.8 operating system, go to http://www.polycom.com. In the Search box, type PPCIP
application download.
2 Download and install the People+Content IP software.
Polycom, Inc.
®
Windows XP, Windows Vista, Windows 7, Windows 8, or Apple
26