Download And Install Polycom People+Content Technology; Share Content Using Polycom People+Content Ip - Polycom RealPresence Group Series Manual

Related Topics
Sharing Content

Download and Install Polycom People+Content Technology

You need to download and install the Polycom® People+Content™ technology on a computer before
you can use it to show content.
Note If the room system is paired with a Polycom touch device, you do not need to install the
application onto your computer. After you connect your computer to the touch device
over USB, a version of the People+Content IP application launches automatically.
Procedure
1 On a computer, go to the
2 Download the People+Content IP software for Mac or PC.
3 Open the zip file and click the application installation.
4 Follow the instructions in the installation wizard.
Related Topics
Polycom People+Content IP

Share Content using Polycom People+Content IP

After you connect a USB cable from your computer to the RealPresence Touch device, the application
opens automatically, and you can share content from your computer.
Note that you cannot share audio from shared content.
Procedure
1 Open the People+ContentIP.exe or .dmg file to start the application.
2 From the Home screen of the RealPresence Touch device, tap
3 Tap People+Content IP, then tap Show.
Content on your computer is displayed on the connected room system monitor and to the far-
end systems.
Related Topics
Polycom People+Content IP
Printed from Polycom, Inc. (http://documents.polycom.com)
Polycom People+Content IP page.
.
Page 22