Audio Mute Notification for Near-End Site
Adjust the Volume
You can raise or lower the volume of the meeting. Changing the volume affects only the sound you hear at
your site.
To adjust the volume:
» On the remote control, press and hold
Mute the Microphone
You can mute the microphone if you do not want the far end to hear conversations at your site. Keep the
following in mine regarding muting:
● Muting the microphone does not mute audio coming from any device connected to the content audio
inputs.
● The red mute indicator on the front of the Polycom EagleEye View camera is lit when the system is
muted or when a Polycom microphone is connected and muted.
● The microphone might mute when the system automatically answers an incoming call and if the
system is configured to mute auto answered calls.
To mute the microphone:
» Press
on the remote control.
If a Polycom tabletop microphone array is connected to your system, you can mute the call by
touching
on the microphone.
The indicators on the microphone are red when your audio is muted. This near-end
appears on the monitor display.
Stereo Audio in Video Calls
If your video conferencing room is configured to use stereo sound, the left and right microphone inputs are
configured during system setup. It is important that you do not move the microphones as this might detract
from the stereo audio experience.
Note: Stereo audio
Stereo audio is available only in video calls of 256 kbps or higher.
Audio Mute Notification for Near-End Site
When the near-end site microphone is muted and the RealPresence Group Series audio system detects
sound in the near-end site conference room, the RealPresence Group Series displays a You are muted
notification to warn you that your audio is muted. This message appears for 8 seconds on the near-end site
main display and is displayed once per audio mute session. Audio mute notification is automatic and no
intervention is required.
Polycom, Inc.
or
to increase or decrease the near-end volume.
icon also
25
Need help?
Do you have a question about the realpresence group series and is the answer not in the manual?