Polycom realpresence group series User Manual page 49

You can use either of the following methods to dial a RealPresence Capture Server and activate the controls
on the TVUI:
● RealPresence Group system local interface with the remote control
● RealPresence Group system with the Touch Control
RealPresence Capture Server DTMF Codes
You can use the RealPresence Group system local interface to start, pause, resume, stop, and playback a
RealPresence Capture Server recording.
The supported DTMF codes for activating the button controls on the TVUI are listed in the next table.The
far end controls are presets that correspond to the button controls on the TVUI. You activate these controls
by using the selection buttons (Left, Up, and Right) on the remote control.
Note: Access to recordings
You have immediate access to a playback as long as the TVUI remains open. After this
time, you must access the RealPresence Capture Server portal to access the recording in
the list of archives where recordings are saved.
TVUI State
Menu display state
Polycom, Inc.
Operation
Pause recording
Start a recording
Resume a paused recording
Stop a recording
Playback a recording
DTMF Code
*1
*2
*3
*5
49