Place a Point-to-Point Call with a Connected SoundStation IP
To place a multipoint call using a connected SoundStation IP 7000 conference phone:
1 Call the first site.
2 When the call connects, press the Add Video or Add Phone soft key on the conference phone.
3 Place a call to the next site.
4 Repeat steps 2 and 3 until all sites are connected.
Control Volume with a Connected SoundStation IP
To control volume in a call using a connected SoundStation IP 7000 conference phone:
» Press
and
You can also adjust the volume using the volume buttons on the RealPresence Group system remote
control.
Mute Audio with a SoundStation IP
To mute audio in a call using a connected SoundStation IP 7000 conference phone:
» Press
on the conference phone.
You can also mute the audio using the mute button on the RealPresence Group system remote control or
on a connected RealPresence Group system microphone.
The indicators on the conference phone are red when your audio is muted. The near-end
appears on the monitor display.
End a Call with a Connected SoundStation IP
To end a call using a connected SoundStation IP 7000 conference phone:
● Press
on the conference phone to hang up the call.
● Press the More soft key then the Manage soft key to hang up one connection in a multipoint call.
Display Content with a Connected SoundStation IP
To start or stop showing content using a connected SoundStation IP 7000 conference
phone:
» Press the Content soft key on the conference phone. Content plays from the following input if that
input is configured for Content:
RealPresence Group 310 system: You can connect a camera to video input 2.
RealPresence Group 500 system: You can connect a camera to video input 2.
Polycom, Inc.
on the conference phone to adjust the volume of audio from the far end.
icon also
39
Need help?
Do you have a question about the realpresence group series and is the answer not in the manual?