Use The Remote Control To Record On A Realpresence Capture Server; Use Far End Controls To Record On A Realpresence Capture Server - Polycom realpresence group series User Manual

TVUI State
Video playback state

Use the Remote Control to Record on a RealPresence Capture Server

To activate TVIU button controls using a remote control:
1 To dial the Capture Server, do one of the following using your remote control:
 Press
.
 Navigate to
2 In the dialing field, enter the number of the RealPresence Capture Server you want to call as
follows:
 Numbers: To enter numbers, select each number on the keypad with the remote control or enter
numbers on your remote control.
 Letters: To enter letters, select Keyboard. Then use your remote control to select each letter on
the onscreen keyboard. Or you can use the text-entry method commonly used with cell phones
to select letters directly on your remote control.
 Backspace: To delete a number or letter, press <back button icon> on the remote control.
3 The TVUI opens. If the recording does not start immediately, press *2 on the remote control to start
the recording.
4 When you are done recording, press *3 on the remote control.
5 To playback the recording, press *5 on the remote control.

Use Far End Controls to Record on a RealPresence Capture Server

To activate TVUI far end controls using a remote control:
1 Point the remote control toward the RealPresence Group system.
2 Using the remote control, press the appropriate selection button (Left, Up, or Right) that
corresponds to the far end control shown on the TVUI (Record Start/Stop, Confirm/Pause, or Play)
that you want to activate.
Polycom, Inc.
Operation
Pause the video
Start the video
Resume a paused video
Stop a playback and return to the main menu
Reverse a video
Fast forward a video
.
DTMF Code
*1
*2
*3
*4
*6
50