Connecting Computers To Polycom Hdx Systems; Configuring Content Sharing; Configuring Content Display With People+Content Ip - Polycom HDX Series Administrator's Manual

Connecting Computers to Polycom HDX Systems

Configuring Content Sharing

Configuring Content Display with People+Content IP

You can connect a computer directly to video input 4 or 5. When you do this,
other call participants can see everything that you see on your computer.
When you connect to video input 4, you can also connect to audio input 4 to
share sound from your computer. Audio from the computer is muted unless
the computer (video input 4) is selected as a video source.
Y 1 C
2
IOIOIO
1
To configure the content display:
1. Go to System > Admin Settings > Monitors > Monitors.
2. Select Display Content for the monitor that will display content.
3. Go to System > Admin Settings > Network > Call Preference.
4. Enable H.239.
5. Go to System > Admin Settings > Audio > Audio Settings >
6. Set the Content Input Level.
People+Content IP is included with the Polycom HDX 9004 system. It enables
a presenter to show content from a computer to other sites in a video
conference using only an IP network connection.
4
Y 2
C
1 2 Y VCR/DVD C
1 3 VCR/DVD 4
4
Content and Closed Captions
C 4
4 5
100-240VAC 50/60Hz 4A
1 3 VCR/DVD IR
LAN
PC CARD
.
5 - 3