Dell S6000–ON Configuration Manual page 81

Hide thumbs Also See for S6000–ON:

Table of Contents

Press esc key to abort the boot process (while the system prompts to)

You enter BLI immediately, as indicated by the BOOT_USER # prompt.

press any key

Assign the new location of the FTOS image to be used when the system reloads.

To boot from flash partition A:

BOOT_USER # boot change primary

boot device : flash

file name : systema

To boot from flash partition B:

BOOT_USER # boot change primary

boot device : flash

file name : systemb

To boot from network:

BOOT_USER # boot change primary

boot device : tftp

file name : FTOS-SI-9-5-0-169.bin

Server IP address : 10.16.127.35

Assign an IP address and netmask to the Management Ethernet interface.

BOOT_USER # interface management ethernet ip address ip_address_with_mask

For example, 10.16.150.106/16.

Assign an IP address as the default gateway for the system.

default-gateway gateway_ip_address

For example, 10.16.150.254.

The environment variables are auto saved.

Reload the system.

BOOT_USER # reload

Troubleshooting