Dell S6000–ON Configuration Manual page 398

Hide thumbs Also See for S6000–ON:
Table of Contents

Advertisement

Commas
Add Ranges
Create a Single-Range
The following is an example of a single range.
Example of the interface range Command (Single Range)
Dell(config)# interface range tengigabitethernet 1/1/1 - 1/2/3
Dell(config-if-range-te-1/1/1-1/2/3)# no shutdown
Dell(config-if-range-te-1/1/1-1/2/3)#
Create a Multiple-Range
The following is an example of multiple range.
Example of the interface range Command (Multiple Ranges)
Dell(conf)#interface range tengigabitethernet 1/5/1 - 1/10/1 ,
tengigabitethernet 1/1/1 , vlan 1
Dell(conf-if-range-te-1/1/1,te-1/5-1/10/1,vl-1)#
Exclude Duplicate Entries
The following is an example showing how duplicate entries are omitted from the interface-range prompt.
Example of the Interface-Range Prompt for Duplicate Interfaces
Dell(conf)#interface range vlan 1 , vlan 1 , vlan 3 , vlan 3
Dell(conf-if-range-vl-1,vl-3)#
Dell(conf)#interface range tengigabitethernet 2/1/1 - 2/3/2 ,
tengigabitethernet 2/1/1 - 2/3/2 , tengigab 2/1/1 - 2/3/2
Dell(conf-if-range-te-2/1/1-2/3/2)#
Exclude a Smaller Port Range
The following is an example show how the smaller of two port ranges is omitted in the interface-range
prompt.
Example of the Interface-Range Prompt for Multiple Port Ranges
Dell(conf)#interface range tengigabitethernet 2/1/1 - 2/4/2 , tengigab 2/1/1 -
2/2/2
Dell(conf-if-range-te-2/1/1-2/4/2)#
Overlap Port Ranges
The following is an example showing how the interface-range prompt extends a port range from the
smallest start port number to the largest end port number when port ranges overlap. handles overlapping
port ranges.
Example of the Interface-Range Prompt for Overlapping Port Ranges
Dell(conf)#interface range tengigabitethernet 2/1/1 - 2/3/3 , te 2/1/1 - 2/5/1
Dell(conf-if-range-te-2/1/1-2/5/1)#
Commas
The following is an example of how to use commas to add different interface types to the range, enabling
all TenGigabitEthernet interfaces in the range 5/1/1 to 5/4/4 and both TenGigabitEthernet interfaces 1/1/1
and 1/1/2.
Example of Adding Interface Ranges
Dell(config-if)# interface range tengigabitethernet 5/1/1 - 5/4/4,
tengigabitethernet 1/1/1 - 1/1/2
Dell(config-if-range-te-5/1/1-5/4/4)# no shutdown
398
Interfaces

Advertisement

Table of Contents
loading

Table of Contents