Dell S6000–ON Configuration Manual page 271

Command
show interface port-type slot/port pfc
{summary | detail}
show interface port-type slot/port pfc
statistics
show interface port-type slot/port ets
{summary | detail}
show interface port-type slot/port DCBx
detail
show stack-unit {0-11 | all} stack
ports all pfc details
show stack-unit {0-11 | all} stack
ports all ets details
Examples of the show Commands
The following example shows the show dot1p-queue mapping command.
Dell(conf)# show qos dot1p-queue-mapping
Dot1p Priority: 0 1 2 3 4 5 6 7
Queue : 0 0 0 1 2 3 3 3
The following example shows the show dcb command.
Dell# show dcb
stack-unit 2 port-set 0
DCB Status : Enabled
PFC Port Count : 56 (current), 56 (configured)
PFC Queue Count : 2 (current),
The following example shows the show qos priority-groups command.
Dell#show qos priority-groups
priority-group ipc
priority-list 4
set-pgid 2
The following example shows the output of the show qos dcb-map test command.
Dell#show qos dcb-map test
-----------------------
State :Complete
PfcMode:ON
--------------------
PG:0 TSA:ETS BW:50
Data Center Bridging (DCB)
2 (configured)
PFC:OFF
Output
Displays the PFC configuration applied to ingress
traffic on an interface, including priorities and link
delay.
To clear PFC TLV counters, use the clear pfc
counters interface port-type slot/port
command.
Displays counters for the PFC frames received and
transmitted (by dot1p priority class) on an interface.
Displays the ETS configuration applied to egress
traffic on an interface, including priority groups
with priorities and bandwidth allocation.
To clear ETS TLV counters, enter the clear ets
counters interface port-type slot/port
command.
Plays the DCBx configuration on an interface.
Displays the PFC configuration applied to ingress
traffic, including priorities and link delay.
Displays the ETS configuration applied to ingress
traffic on stack-links, including priorities and link
delay.
271