Dell S6000–ON Configuration Manual page 284

Hide thumbs Also See for S6000–ON:

Table of Contents

Figure 32. PFC and ETS Applied to LAN, IPC, and SAN Priority Traffic

QoS Traffic Classification: The service-class dynamic dot1p command has been used in Global

Configuration mode to map ingress dot1p frames to the queues shown in the following table. For more

information, refer to

QoS dot1p Traffic Classification and Queue

The following describes the dot1p-priority class group assignment

dot1p Value in the

Priority Group Assignment

Incoming Frame

Data Center Bridging (DCB)

Troubleshooting