Configuring Vxlan Gateway; Connecting To An Nvp Controller - Dell S6000–ON Configuration Manual

Hide thumbs Also See for S6000–ON:

Table of Contents

You can create a logical network by creating a logical switch. The logical network acts as the

forwarding domain for workloads on the physical as well as virtual infrastructure.

Figure 137. Create Logical Switch

Create Logical Switch Port

A logical switch port provides a logical connection point for a VM interface (VIF) and a L2 gateway

connection to an external network. It binds the virtual access ports in the GW to logical network

(VXLAN) and VLAN.

Figure 138. Create Logical Switch Port

NOTE: For more details about NVP controller configuration, refer to the NVP user guide from

Configuring VxLAN Gateway

To configure the VxLAN gateway on the switch, follow these steps:

Connecting to NVP controller

Advertising VXLAN access ports to controller

To connect to an NVP controller, use the following commands.

feature vxlan

CONFIGURATION mode

feature vxlan

Virtual Extensible LAN (VXLAN)