Dell S6000–ON Configuration Manual page 323

The following table describes the show fip-snooping sessions command fields.
Table 29.
show fip-snooping sessions
Field
ENode MAC
ENode Interface
FCF MAC
FCF Interface
VLAN
FCoE MAC
FC-ID
Port WWPN
Port WWNN
The following example shows the show fip-snooping config command.
Dell# show fip-snooping config
FIP Snooping Feature enabled Status: Enabled
FIP Snooping Global enabled Status: Enabled
Global FC-MAP Value: 0X0EFC00
FIP Snooping enabled VLANs
VLAN Enabled FC-MAP
---- ------- --------
100 TRUE 0X0EFC00
The following example shows the show fip-snooping enode command.
Dell# show fip-snooping enode
Enode MAC
---------
d4:ae:52:1b:e3:cd
The following table describes the show fip-snooping enode command fields.
Table 30.
show fip-snooping enode
Field
ENode MAC
ENode Interface
FCF MAC
VLAN
FC-ID
FCoE Transit
Command Description
Enode Interface FCF MAC
--------------- -------
Te 1/11/1 54:7f:ee:37:34:40 100
Command Description
Description
MAC address of the ENode .
Slot/port number of the interface connected to the
ENode.
MAC address of the FCF.
Slot/port number of the interface to which the FCF
is connected.
VLAN ID number used by the session.
MAC address of the FCoE session assigned by the
FCF.
Fibre Channel ID assigned by the FCF.
Worldwide port name of the CNA port.
Worldwide node name of the CNA port.
VLAN FC-ID
---- -----
Description
MAC address of the ENode.
Slot/port number of the interface connected to the
ENode.
MAC address of the FCF.
VLAN ID number used by the session.
Fibre Channel session ID assigned by the FCF.
62:00:11
323