Dell S6000–ON Configuration Manual page 611

The range of resolution values is:
• ISIS routes - 1 to 1000. The default is 1.
• OSPF routes - 1 to 1592. The efault is 1.
2. Configure object tracking on the metric of an IPv4 or IPv6 route.
CONFIGURATION mode
track object-id {ip route ip-address/prefix-len | ipv6 route ipv6-address/
prefix-len} metric threshold [vrf vrf-name]
Valid object IDs are from 1 to 65535.
Enter an IPv4 address in dotted decimal format. Valid IPv4 prefix lengths are from /0 to /32.
Enter an IPv6 address in X:X:X:X::X format. Valid IPv6 prefix lengths are from /0 to /128.
(Optional) E-Series only: For an IPv4 route, you can enter a VRF name.
3. (Optional) Configure the time delay used before communicating a change in the UP and/or DOWN
status of a tracked route.
OBJECT TRACKING mode
delay {[up seconds] [down seconds]}
Valid delay times are from 0 to 180 seconds.
The default is 0.
4. (Optional) Identify the tracked object with a text description.
OBJECT TRACKING mode
description text
The text string can be up to 80 characters.
5. (Optional) Configure the metric threshold for the UP and/or DOWN routing status to be tracked for
the specified route.
OBJECT TRACKING mode
threshold metric {[up number] [down number]}
The default UP threshold is 254. The routing state is UP if the scaled route metric is less than or equal
to the UP threshold.
The defult DOWN threshold is 255. The routing state is DOWN if the scaled route metric is greater
than or equal to the DOWN threshold.
6. (Optional) Display the tracking configuration.
EXEC Privilege mode
show track object-id
7.
Object Tracking
611