Dell S6000–ON Configuration Manual page 274

Fields
Application Priority TLV: Local ISCSI Priority Map
Application Priority TLV: Remote FCOE Priority
Map
Application Priority TLV: Remote ISCSI Priority Map Status of iSCSI advertisements in application
PFC TLV Statistics: Input TLV pkts
PFC TLV Statistics: Output TLV pkts
PFC TLV Statistics: Error pkts
PFC TLV Statistics: Pause Tx pkts
PFC TLV Statistics: Pause Rx pkts
The following example shows the show interface pfc statistics command.
Dell#show interfaces te 1/1/1 pfc statistics
Interface TenGigabitEthernet 1/1/1
Priority Received PFC Frames Transmitted PFC Frames
-------- ------------------- ----------------------
0 0
1 0
2 0
3 0
4 0
5 0
6 0
7 0
The following example shows the show interface ets summary command.
Dell(conf-qos-policy-out-ets)#do sho int te 1/3/1 ets su
Interface TenGigabitEthernet 1/3/1
Max Supported TC Groups is 4
Number of Traffic Classes is 8
Admin mode is on
Admin Parameters :
------------------
Admin is enabled
TC-grp Priority#
------------------------------------------------
0
1 0,1,2
2 3
3 4,5,6,7
4
5
6
7
Remote Parameters :
274
0
0
0
0
0
0
0
0
Bandwidth TSA
- -
100% ETS
0 % SP
0 % SP
- -
- -
- -
- -
Description
Priority bitmap used by local DCBx port in ISCSI
advertisements in application priority TLVs.
Status of FCoE advertisements in application
priority TLVs from remote peer port: enabled or
disabled.
priority TLVs from remote peer port: enabled or
disabled.
Number of PFC TLVs received.
Number of PFC TLVs transmitted.
Number of PFC error packets received.
Number of PFC pause frames transmitted.
Number of PFC pause frames received
Data Center Bridging (DCB)