Dell S6000–ON Configuration Manual page 1000

N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1,
L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default,
> - non-active route, + - summary route
Gateway of last resort is not set
Destination
Last Change
-----------
-----------
C 3.0.0.0/24
00:20:52
C 30.0.0.0/24
0/0
S 31.0.0.0/24
00:09:06
================================================================================
======
The following shows the output of the show commands on Router 2.
Router 2
Dell#show ip vrf
VRF-Name
default-vrf
3/1/1-3/1/3,
2/1/1-2/17/1,2/21/1-2/32/4,
blue
orange
2/2/1,
green
2/3/1,
Dell#show ip ospf 1 neighbor
Neighbor ID
Interface Area
1.0.0.1 1
128 0
!
Dell#sh ip ospf 2 neighbor
Neighbor ID
Interface Area
2.0.0.1 1
192 0
!
Dell#show ip route vrf blue
Codes: C - connected, S - static, R - RIP,
B - BGP, IN - internal BGP, EX - external BGP,LO - Locally
Originated,
O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1,
1000
Gateway
-------
Direct, Vl 256
Direct, Te 1/3/1
00:09:45
via 3.0.0.2, Vl 256
Pri
FULL/BDR 00:00:36
Pri
FULL/BDR 00:00:33
State Dead Time
State Dead Time
Dist/Metric
-----------
0/0
1/0
VRF-ID Interfaces
0 Te
1 Te 2/1/1,
2
3
Address
1.0.0.1 Vl
Address
2.0.0.1 Vl
Virtual Routing and Forwarding (VRF)
Te
Ma 1/1,
Ma 2/1,
Nu 0,
Vl 1
Vl 128
Te
Vl 192
Te
Vl 256