Loading Media - Intermec PB42 Quick Start Manual

3 Close the battery cover.
4 Connect the AC power adapter to the DC power connector
on the printer.
5 Connect one end of the power cord to the AC power adapter
and then plug other end into an AC outlet.

Loading Media

You can use roll or fanfold receipt media with the PB42 printer.
The PB42 ships with a sample roll of media that you can use the
first time you unpack the shipping box and verify that the
printer is working correctly.
The media you use in the PB42 must meet these specifications.
Specification
Receipt roll core (ID)
Receipt roll maximum diameter
Media maximum width
To load media
1 Slide the media cover release button to the unlocked (left)
position.
2 Press the media cover release button to open the media cover.
PB42 Printer Quick Start Guide
DC power
connector
Dimensions
1.9 cm (.75 inch)
6.7 cm (2.65 inches)
11.2 cm (4.40 inches)
3