Scanning Section - Konica Minolta FK-502 Service Manual

Network fax
Hide thumbs Also See for FK-502:
Table of Contents

Advertisement

BASIC SPECIFICATIONS
(8)
FAX memory backup .................................... With HDD installed: Image data is saved in HDD.
(9)
Multiple line connection ............................... Two lines can be connected by installing the Line
(10)
Communication time .................................... Level of 2 seconds (Konica Minolta standard A4 chart,
(11)
Resolution conversion
Scanner
At Sending
inch
Communication
mm
At Receiving
inch
1.1.2

Scanning Section

(1)
Scanning method ......................................... Platen documents
(2)
Scanning resolution ...................................... Normal
(3)
Mixed original .............................................. Possible to mix documents of different sizes.
1-2
FK-502/Network Fax Service Manual Ver.3.0
With no HDD installed:
With bizhub 500/420, the image data is saved on
the RAM disk which is backed up with the battery
on the copier side. Back-up time is less than 60
minutes (at full-charge).
With bizhub 750/600, the image data is saved in
the compact flash
Extension kit.
28,800bps)
Density Conversion
inch
mm
Density Conversion
mm
inch
inch
inch
Impossible to scan book documents (book mode)
ADF book documents
Scanning mode: Single sided, Double sided and
Cover + 2 sided (varies depending on models.
Refer to "9.3. Differences of Functions by Model
(as of Aug.11. 2006)".)
Possible to scan the ADF mixed size documents.
Fine
Super fine
Ultra Super fine600 x 600 dpi
Selection by using the [Resolution] key.
You can not change settings on each page.
After rotation of images, sizes are changed by
EOM every time the length of the scan line is
changed at sending.
Communication
mm / inch (600 dpi only)
Print
inch
inch
8 x 3.85 lines/mm
8 x 7.7 lines/mm
16 x 15.4 lines /mm

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents