In Case Of Bizhub C352/C300/C252/C250 - Konica Minolta FK-502 Service Manual

In case of bizhub C352/C300/C252/C250

6.2.In case of bizhub C352/C300/C252/C250
6.2.1 Removal of the FK-502 (bizhub C352/C300/C252/C250)
In order to replace the FK-502, remove the FK-502 in the following order.
NOTE Be sure to check to see if the main power switch is turned off.
The board may be damaged due to static electricity. Be sure to take an appropriate measure
against static electricity before conducting the operations.
6-6
FK-502/Network Fax Service Manual Ver.3.0
1. Turn off the main power switch and the power switch
of the main body, and then unplug the power cord
from the power outlet.
2. Remove the Telephone line cable that is connected.
3. Remove the lower rear cover. (7 screws)
4. Pull out the dust proof filter provided on the rear side of
the main body.
5. Remove the upper rear cover.(4 screws)
6. Remove the IR connector on the right side of the main
body.
7. Open the right door and remove the right rear cover. (3
screws)