Konica Minolta FK-502 Service Manual page 5

2. POWER PLUG SELECTION
In some countries or areas, the power plug provided with the product may not fit wall outlet used in the area. In
that case, it is obligation of customer engineer (hereafter called the CE) to attach appropriate power plug or
power cord set in order to connect the product to the supply.
Power Cord Set or Power Plug
• Use power supply cord set which meets the following criteria:
- provided with a plug having configuration intended for the connection
to wall outlet appropriate for the product's rated voltage and current,
and
- the plug has pin/terminal(s) for grounding, and
- provided with three-conductor cable having enough current capacity,
and
- the cord set meets regulatory requirements for the area.
Use of inadequate cord set leads to fire or electric shock.
• Attach power plug which meets the following criteria:
- having configuration intended for the connection to wall outlet appropri-
ate for the product's rated voltage and current, and
- the plug has pin/terminal(s) for grounding, and
- meets regulatory requirements for the area.
Use of inadequate cord set leads to the product connecting to inade-
quate power supply (voltage, current capacity, grounding), and may result
in fire or electric shock.
• Conductors in the power cable must be connected to terminals of the plug
according to the following order:
• Black or Brown:
• White or Light Blue:
• Green/Yellow:
Wrong connection may cancel safeguards within the product, and results
in fire or electric shock.
WARNING
L (line)
N (neutral)
PE (earth)
SAFETY AND IMPORTANT WARNING ITEMS
AC230V
AC208V 240V
S 3
-