Konica Minolta FK-502 Service Manual page 123

FK-502/Network Fax Service Manual Ver.3.0
FK-502 board
7.
Board installation box
Remove the FK-502 board from the Board installation
box.
NOTE
• When pulling out the FK-502 board, be sure to
hold the 2 knob screws provided at the upper
and lower sections and pull them out to this
side.
• When pulling out the FK-502 board, be sure to
insert it with the board set to the groove.
• Reinstall the above parts following the
removal steps in reverse.
In case of bizhub 500/420
6-15