Telephone Function - Konica Minolta FK-502 Service Manual

Network fax
Hide thumbs Also See for FK-502:
Table of Contents

Advertisement

TELEPHONE FUNCTION

7.2.TELEPHONE FUNCTION
7.2.1
TEL/FAX Switching
Outline
A function to switch telephone and FAX automatically after reception. Depends on Country spec.
<Operation>
(1) When CNG is not detected for 2 seconds (or 4 seconds, following parameter) after line seizure,
this function sends Voice response message 1 and continues CNG detection.
(2) If voice response 1 is sent and CNG detection is continued for 4 seconds but could not be
detected, external ringer is sent to the externally installed phone.
(3) When CNG is not detected for a given period (Default is 20 seconds. Changeable by address
parameters), this function stops External ringer transmission and becomes FAX reception after
the voice response message 2 is sent.
(4) This function detects OFF-HOOK of the external telephone during External ringer transmission
only.
(5) When OFF-HOOK of the external telephone is detected during External ringer transmission, the
line is connected to the external telephone. Even if you use the telephone, you can manually
switch to the FAX reception after that.
(6) When CNG is detected during the above-mentioned External ringer transmission, External ringer
transmission is stopped and the FAX reception starts.
No
FP
.
Tel-Fax
1
switching
RBT trans-
2
mission time
Tel-Fax
3
switching
parameter
7-28
Line seizure
CNG detection term
2 seconds
(1)
Voice response
message 1
4 seconds
(2)
Meaning And
Address
Purpose
External tele-
0x0e0095
phone off-book
bit4
detection func-
bit5
tion
External ringer
transmission
time (3) (in
0x0e00f8
steps of 1 sec-
ond)
Time from
vocal response
to RBT trans-
0x0e004e
mission (CNG
bit7
detection wait-
ing time 2)
FK-502/Network Fax Service Manual Ver.3.0
Voice response
message 2
External ringer
External phone off-hook
detection term
(3)
Value
00: No
10: Normal
(RBT
transmis-
sion)
unit: 1000 ms,
HEX
0: 2 sec
1: 4 sec
Fax reception
started,
ANsam sent
Default
Note
Those with a
00
serviceman
setting
A service-
0x14
man setting
(20 sec.)
by address
setting
Same as the
0
above

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents