Konica Minolta FK-502 Service Manual page 9

Fixing
• Be sure to lock the caster stoppers.
In the case of an earthquake and so on, the product may slide, leading to
a injury.
Inspection before Servicing
• Before conducting an inspection, read all relevant documentation (service
manual, technical notices, etc.) and proceed with the inspection following
the prescribed procedure in safety clothes, using only the prescribed tools.
Do not make any adjustment not described in the documentation.
If the prescribed procedure or tool is not used, the product may break
and a risk of injury or fire exists.
• Before conducting an inspection, be sure to disconnect the power plugs
from the product and options.
When the power plug is inserted in the wall outlet, some units are still
powered even if the POWER switch is turned OFF. A risk of electric shock
exists.
• The area around the fixing unit is hot.
You may get burnt.
Work Performed with the product Powered
• Take every care when making adjustments or performing an operation
check with the product powered.
If you make adjustments or perform an operation check with the external
cover detached, you may touch live or high-voltage parts or you may be
caught in moving gears or the timing belt, leading to a risk of injury.
• Take every care when servicing with the external cover detached.
High-voltage exists around the drum unit. A risk of electric shock exists.
SAFETY AND IMPORTANT WARNING ITEMS
CAUTION
CAUTION
WARNING
S 7
-