Removal Of The Memory (Bizhub C352/C300/C252/C250) - Konica Minolta FK-502 Service Manual

FK-502/Network Fax Service Manual Ver.3.0
6.2.3

Removal of the memory (bizhub C352/C300/C252/C250)

Replace the memory and the lithium battery in the following order.
NOTE Be sure to check to see if the main power switch is turned off.
The board may be damaged due to static electricity. Be sure to take an appropriate measure
against static electricity before conducting the operations.
In case of bizhub C352/C300/C252/C250
1. Turn off the main power switch and the power switch
of the main body and then unplug the power cord from
the power outlet.
2. Remove the cable that is connected.
3. Remove the lower rear cover. (7 screws)
4. Pull out the dust proof filter provided on the rear side of
the main body.
5. Remove the upper rear cover.(4 screws)
6. Remove the IR connector on the right side of the main
body.
7. Open the right door and remove the rear right cover. (3
screws)
6-9