Removal Of The Speaker (Bizhub C450/C351) - Konica Minolta FK-502 Service Manual

FK-502/Network Fax Service Manual Ver.3.0
6.1.4

Removal of the speaker (bizhub C450/C351)

Replace the speaker in the following order.
NOTE Be sure to check to see if the main power switch is turned off.
The board may be damaged due to static electricity. Be sure to take an appropriate measure
against static electricity before conducting the operations.
Wire
Saddle
1. Turn off the main power switch and the power switch
of the main body and then unplug the power cord from
the power outlet.
2. Open the front door of the main body and remove the
panel cover. (1 screw)
3. Remove the cover. (1 screw)
4. Remove the connector, remove the fixing screw and
then remove the speaker.
NOTE
• When reinstalling the speaker, be sure to
check to see if the speaker harness on the
main body side is seated securely in the wire
saddle.
• Reinstall the above parts following the
removal steps in reverse.
In case of bizhub C450/C351
6-5