Network Fax Setting - Konica Minolta FK-502 Service Manual

Network Fax Setting

3.5.Network Fax Setting
In order to use the network fax function (Internet fax/IP address fax), you must set the following.
• Internet Fax
• IP Address Fax The copier is required to be connected to the TCP/IP network in advance.
• SIP Fax (Not Used)
(1) See "3.1.3 How to Enter the Service Mode" to indicate the [Service mode setting] screen.
(2) Press [System 2] key.
(3) Press [Network Fax Settings] key.
(4) Set to [ON] an item you want to set.
(5) Press the [END] key to return Service Mode screen.
3-42
The provision of a mail server is essential.
The copier is required to be connected to the TCP/IP network in advance.
The copier is required to be provided with the Fax kit. However, the use of the sub line is
unavailable.
FK-502/Network Fax Service Manual Ver.3.0